# Tags
#Aviation

EXTERIOR LIGHTS OF AN AIRCRAFT

All aircraft are equipped with a variety of lights that are used for navigation, safety, and to improve visibility during flight or when taxiing on the ground. The external lights on aircraft fall into two general categories. The first is navigation lights or beacons. these are always illuminated while the aircraft is in operation. A second type includes takeoff and landing lights that are used to improve visibility when the plane is close to or on the ground. Some lights are discussed in greater detail below.

Navigation lights
Most modern aircraft are equipped with a steady light near the leading edge of each wingtip. When facing forward from the perspective of the pilot, the light on the right wingtip is green, and that on the left wing is red. The different colors make it possible for an outside observer, such as the pilot of another aircraft, to determine which direction the plane is flying. These navigation lights are most useful at night when it its difficult for a pilot to tell which direction the aircraft is flying.

In addition to the red and green lights, planes are also fitted with other steady white navigation lights in various locations. Large airliners, in particular, will often have such lighting on the trailing edge of each wingtip. These lights are also sometimes placed along the trailing edges of the horizontal tail. Another location is at the very end of the fuselage or at the top of the vertical tail. One of these latter lights placed along the aircraft centerline is especially common on smaller airliners and commuter planes. The purpose of these steady white lights is to improve the plane’s visibility from behind the aircraft.

Anti-Collision Beacon lights
Two beacon lights are fitted to aircraft near the center of the fuselage. One is located on top of the fuselage and the other on the bottom. These lights are colored reddish orange. The beacon lights are turned on just before the engines are started and they remain active until the last engine is shut down. The beacons help to serve as a safety warning to ground personnel and other aircrafts on the ground that the engines are up and running.

Strobe lights
High intensity strobe lights that flash a white colour light are located on each wingtip. Most smaller planes are only equipped with one of these strobes near the leading edge just behind the red or green navigation light. Larger airliners may be equipped with an additional strobe at the trailing edge as well. These flashing lights are very bright and intended to attract attention during flight. They are sometimes also used on the runway and during taxi to make the plane more conspicuous.

Logo lights
The lights are usually located on the surface of or at the tips of the horizontal stabilizer. The steady white lights are used to illuminate the company’s logo painted on the vertical tail. While useful for advertising, the primary purpose of these lights is safety since the bright lights help to make the plane more visible.

Wing lights
Many airlines feature lights along the root of the wing leading edge that can be used to illuminate the wing and engine pylons in flight. These lights may be used to make the plane more visible during takeoff and landing or to inspect the wings for damage in flight. Pilots can also use the wing lights to inspect the wings and slats for any ice accretion that might build up when flying through clouds.

Taxi lights and Runway Turnoff lights.
A bright white lamp is located on the nose landing gear strut of most planes. This light is typically turned on whenever the aircraft is in motion on the ground for greater visibility during taxi, takeoff, and landing.

Usually located in the leading edge of the wing root, these bright white lamps are intended to provide side and forward lighting during taxi and when turning off the runway. These lights are most useful at poorly lit airports but are usually unnecessary. The lights can also be used in flight if greater visibility is required.

Landing lights
Bright white landing lights are usually fitted to most planes for enhanced visibility during the landing approach. These lights can also be used to illuminate the runway at poorly lit airports. They are often required for night landings but also commonly used during the day as well to make the plane more noticeable. While the usage of these lights is common, their location can vary from plane to plane. Landing lights may be located in the wing root, in the outboard wing, or somewhere along the forward fuselage. Some aircraft are equipped with multiple sets of landing lights in more than one of these locations. The 737, for example, has inboard landing lights located in the wing root as well as outboard landing lights in the outboard flap fairings.

Wheel Well lights
Some planes are equipped with additional lights in the nose and main gear know as wheel wells. These lights are provided primarily to assist ground personnel in making pre-flight inspections of a plane at night.

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Discover more from Aviation for Aviators

Subscribe now to keep reading and get access to the full archive.

Continue reading